- Ciecieląg, K., Zaleski K., Kecik K.
Effect of milling parameters on surface defect formation in polymer
composites. Materials Science Materials Science, Vol. 57, No. 6, 2022,
http://doi.10.1007/s11003-022-00622-w (MNiSW=40, IF=0.675).
- Ciecielag,
K., Kecik, K., Skoczylas, A., Matuszak, J., Korzec, I., Zaleski, R.
Non-Destructive Detection of Real Defects in Polymer Composites by
Ultrasonic Testing and Recurrence Analysis. Materials 2022, 15(20),
7335. https://doi.org/10.3390/ma15207335 (MNiSW=140. IF= 3.748).
- Kecik, K. Smagala, A. Lyubitska, K. Ball Bearing Fault Diagnosis Using Recurrence Analysis. Materials 2022, 15, 5940.
https://doi.org/10.3390/ma15175940 (MNiSW=140. IF= 3.748).
- Mitura A., Kecik K.
Modeling and energy recovery from a system with two pseudo-levitating
magnets. Bulletin of the Polish Academy of Sciences: Technical
Sciences, 2022, doi: 10.24425/bpasts.2022.141721, (MNiSW=100. IF= 1.515).
- Kecik, K. Modification of Electromechanical Coupling in Electromagnetic Harvester. Energies 2022, 15, 4007.
https://doi.org/10.3390/en15114007 ( MNISW=140, IF=3.004).
- Kecik, K.
Nonlinear Dynamics and Energy Recovery of a Vibration
Absorber/Harvester System with an Adaptive Suspension , Journal of
Vibration Engineering & Technologies, 2022,
https://doi.org/10.1007/s42417-022-00536-6, ( MNISW=40, IF=1.889).
- Kecik K., Mitura A., Effect of
variable friction on electromagnetic harvester dynamics. The European
Physical Journal Special Topics,10.1140/epjs/s11734-022-00493-x.
- Matuszak J., Zaleski K., Skoczylas A., Ciecieląg K, Kęcik K. Influence of Semi-Random and Regular Shot Peening on Selected Surface Layer Properties of Aluminum Alloy. Materials. 2021, vol. 14, nr 24, 1-22. https://doi.org/10.3390/ma14247620 (MNiSW=140, IF=3.623 ).
- Ciecieląg
K., Skoczylas A., Matuszak J., Zaleski K., Kecik K. Defect detection and
localization in polymer composites based on drilling force signal by
recurrence analysis, Measurement, 186, 2021, 110126,
https://doi.org/10.1016/j.measurement.2021.110126. (MNiSW=200, IF=3.927 ).
- Kecik K., Kowalczuk M. Effect of Nonlinear Electromechanical Coupling
in Magnetic Levitation Energy Harvester.Energies 2021, 14(9), 2715. https://doi.org/10.3390/en14092715 (MNiSW=140, IF=3.004 ).
- Smagala, A., Kecik, K. (2021). Nonlinear dynamics analysis of a rolling
bearing. Journal Européen des Systèmes Automatisés, Vol. 54, No. 1, pp.
21-26. https://doi.org/10.18280/jesa.540103.
- Rusinek R., Kecik K.
Effect of linear electromechanical coupling in nonlinear implanted
human middle ear. Mechanical Systems and Signal Processing, 151 (2021)
107391, 2021. DOI: 10.1016/j.ymssp.2020.107391
(MNiSW=200, IF=6.823).
- Kecik K.
Simultaneous vibration mitigation and energy harvesting from a
pendulum-type absorber. Communications in Nonlinear Science and
Numerical Simulation, 92, 2021,105479. https://doi.org/10.1016/j.cnsns.2020.105479.(MNISW=100, IF=4.260).
- Kecik K.,Numerical
study of a pendulum absorber/harvester system with a semi-active
suspension. ZAMM - Zeitschrift fuer Angewandte Mathematik und Mechanik ,
101(1), 1-12, 2021. https://doi.org/10.1002/zamm.202000045 (MNISW=70, IF=1.467).
- Kecik K.,
Ciecielag K., Zaleski K.Damage detection by recurrence and entropy
methods on the basis of time seriesmeasured during composite
milling.International Journal of Advanced Manufacturing Technology,
2020, 111, 549–563, (MNISW=100, IF=3.226). doi.org/10.1007/s00170-020-06036-9
- Ciecielag K., Kecik K., Zaleski K. Defedts detection from time series of cutting force in composite milling process by recurrence analysis. Journal of Reinforced Plastics and Composite, 39(23-24), 090-901, 2020. https://doi.org/10.1177/0731684420935985 (MNISW=70, IF=3.710).
- Ciecielag K., Kecik K., Zaleski K. Effect of depth surface defects in carbon
fibre reinforced composite material on the selected recurrence quantifications. Advances in Materials Science, 20, 2(64), 2020. DOI: 10.2478/adms-2020-0011. (MNISW=20).
- Kecik K., Mitura A., Theoretical and experimental investigations of a
pseudo-magnetic levitation system for energy harvesting. Sensors 2020,
20(6), 1623, doi:10.3390/s20061623. (MNISW=100, IF=3.576).
- Kecik
K., Mitura A. Energy recovery from a pendulum tuned mass damper with
two independent harvesting sources. International Journal Mechanical
and Sciences, 174. 105568, ,2020.,https://doi.org/10.1016/j.ijmecsci.2020.105568. (MNISW=140, IF=5.329).
- Smagala A., Kecik K.Nonlinear
model and simulation of a rolling bearing. IOP Conference Series:
Materials Science and Engineering.710 (2019) 012017.
doi:10.1088/1757-899X/710/1/012017. (MNISW=5). LINK
- Ciecielag K., Zaleski K., Kecik K. The
influence of milling parameters on the surface roughness of glass and
carbon fiber reinforced plastics. Mechanik nr 10, 649-651, 2019.
(MNiSW=40). DOI: https://doi.org/10.17814/mechanik.2019.10.84. (MNISW=5). LINK.
- Kecik K. Architecture and optimization of a low frequency maglev energy harvester, International Journal of
Structural Stability and Dynamics (IJSSD), 19(8), 2019, doi.org/10.1142/S0219455419500974 (MNiSW=100, IF=2.156). LINK.
- Rusinek R. Rekas J., Kecik K.
Vibration analysis of a shape memory oscillator by harmonic balance
method verified numerically. International Journal of Bifurcation and
Chaos, 29(3), 1930007-1-1930007-14, 2019. DOI.org/10.1142/S0218127419300076. (MNISW=70, IF=2.469)
- Kecik K.,
Pawlak P. Effect of Magnet-Coil Configuration on Energy Recovery from
an Electromagnetic Harvester. Machine Dynamics Research, 42(2), 35-43,
2018 (MNISW=14).
- Mitura A., Kecik K.,
Augustyniak M., Dynamics and Energy Harvesting Control of an
Autoparametric Pendulum-Like System. Electrical Review, 2018 97),
82-85, 2018, (MNiSW=14), LINK, doi:10.15199/48.2018.07.20.
- Kecik K., Zaszczynska A.,
Mitura A. Experimental investigations of energy recovery from an
electromagnetic pendulumvibration absorber. Journal of Vibration
Testing and System Dynamics, 2(3), 209-2019, 2018, (MNISW=5). DOI:10.5890/JVTSD.2018.09.002.
- Kecik
K.,
Energy recovery from a nonlinear electromagnetic system. Acta
Mechanica et Automatica, 12(1), 11-18, 2018, DOI 10.2478/ama-2018-0002, (MNiSW=14), LINK.
- Kecik
K., Assessment of energy harvesting and vibration mitigation
of a pendulum dynamic absorber. Mechanical Systems and Signal
Processing, 106, 198-209, 2018,(woS, Scopus, MNiSW=45, IF=4.116), doi.org/10.1016/j.ymssp.2017.12.028, (MNISW=45, IF=4.116). LINK.
- Kecik
K., Mitura A., Warminski J., Lenci S. Foldover Effect and
Energy Output
from a Nonlinear Pseudo-Maglev Harvester. AIP Conference Proceedings, 1922, 100009, (2018), (MNISW=15). https://doi.org/10.1063/1.5019094.
- Rusinek R., Kecik K., Szymanski M., Rekas J. An influence of
temperature on reconstructed middle ear with shape memory prosthesis.
Meccanica, 53(8), 1959-1980, 10.1007/s11012-017-0798-7. (MNISW=30, IF=2.211), LINK.i
- Ciecielag K., Kecik
K.,
Zaleski K ., Influence of damage size on its detection of
composite milling process by recurrence plot
technique.
Composites theory and practice, 17(4), 194-199, 2017, (MNiSW=11), LINK.
- Mitura
A., Kecik K.
Odzyskiwanie energii i dynamika wahadłowego
eliminatora drgań z półaktywnym zawieszeniem. Modelowanie
inżynierskie, 64, 61-67, 2017, (MNISW=11), LINK.
- Kecik K.,
Mitura A., Lenci S., Warminski J.
Energy harvesting from a magnetic levitation system. International
Journal of Non-Linear Mechanics , 94, 200-206, 2017, (MNISW=30, IF=1.920), LINK.
- Rusinek R,, Warminski J., Szymanski M., Kecik K., Kozik K.
Dynamics of the middle ear ossicles with an SMA prosthesis. International Journal of
Mechanical Sciences (IJMS), doi,
10.1016/j.ijmecsci.2016.10.004, (MNISW=40, IF=2.481).
- Kecik K.,
Brzeski P., Perlikowski P. Non-linear dynamics and optimization of a
harvester absorber system. International Journal of
Structural Stability and Dynamics (IJSSD), 17(9), 1-15,
2017, (MNISW=25, IF=0.764).
- Kecik K.,
Ciecieleg K., Zaleski K. Damage detection of composite milling process
by recurrence plots and quantyfications analysis. The International Journal of
Advanced Manufacturing Technology (IJAMT), 89 (2017), 133-144,
2017. DOI: 10.1007/s00170-016-9048-8, (MNISW=25, IF=1.458).
- Kecik K.
Enhanced energy
recovery of a vibration absorber using dual harvester systems. Machine
Dynamics Research, 40(2), 79-88, 2016 (MNISW=14).
- Mitura A. Kecik
K. Influences of system parameters on energy harvesting
from autoparametric absorber. Numerical research. Vibration in Physical Systems
(ViPS). XXVII, 281-286, 2016, (MNISW=5).
- Mitura A. Kecik
K. Influences of system parameters on energy harvesting
from autoparametric absorber. Experimental research. Vibration in Physical Systems
(ViPS). XXVII, 287-292, 2016, (MNISW=5).
- Kecik K.,
Borowiec M.,
Rusinek R. Verification of the stability lobes of Inconel 718 milling
by recurrence plot applications and composite multiscale entropy
analysis. European
Physics Journal Plus (EPJ), 131(14), 2016. DOI
10.1140/epjp/i2016-16014-x, (MNISW=25, IF=1.377).
- Kecik K.
Application of shape memory alloy in harvesto-absorber system. Acta Mechanica et Automatica
(AMA), 9(3), 155-160, 2015, (MNISW=14).
- Rusinek R., Lajmert P., Kecik
K.,
Kruszynski B, Warminski J. Chatter identification methods on the basis
of time series measured during titanium superalloy milling. International Journal of
Mechanical Sciences (IJMS), 99, 196–207, 2015,
(MNISW=40, IF=2.034).
- Kecik K.
Dynamics and control of an active autoparametric system. International Journal of
Non-linear Mechanics (IJNM), 70, 63-72, 2015, (MNISW=30, IF=1.977).
- Kecik K.,
Brzeski P., Perlikowski P. Nonlinear dynamics and bifurcation of a vibration
absorber-harvester system. Proceedings of the ECCOMAS Thematic
Conference on Multibody Dynamics 2015, 806-816, 2015, (MNISW=15).
- Mitura A., Kecik
K,
Warminski J, Jarzyna W, Lenci S. A numerical study of an autoparametric
system with electromagnetic energy harvester. Proceedings of the
ECCOMAS Thematic Conference on Multibody Dynamics 2015, 609-615, 2015,
(MNISW=15).
- Kecik
K. Energy
harvesting of an autoparametric system. Proceedings of the 16-th
Conference on Mechatronics - Mechatronika 2014, p. 203-208
(MNISW=15).
- Kecik K.,
Mitura A. Nonlinear Dynamics and Control of an Active
Suspension of a Pendulum Vibration Absorber. Machine Dynamics Research (MDR),
38(1)1, 47 - 53, 2014, (MNiSW=6).
- Kecik K.
Control of chaotic dynamics by magnetorheological damping of a pendulum
vibration absorber. Structural
Engineering and Mechanics (SEM), 51(5), 743-754, 2014,
( MNISW=20, IF=0.927).
- Kecik K.,
Kapitaniak M. Parametric Analysis of Magnetorheologically Damped
Pendulum Vibration Absorber. International
Journal of Structural Stability and Dynamics (IJSSD),
14(8), 1440015 (13 pages), 2014, (MNISW=25, IF=0.764).
- Kecik K.
An active suspension of a pendulum vibration absorber. Modelowanie Inżynierskie (MI),
19(50), 83-88, 2014, (MNISW=4).
- Rusinek R., Weremczuk A.,
Kecik K., Warminski J. Dynamics of a time delayed Duffing
oscillator.
International Journal of Non-Linear Mechanics (IJNM), 65,
98-106, 2014, (MNISW=30, IF=1.977).
- Kecik K.,
Mitura A., Sado D., J. Warminski. Magnetorheological damping and
semi-active control of an autoparametric vibration absorber. Meccanica (Mec),
49(8), 1887-1900, 2014, (MNISW=30, IF=1.949).
- Sado D., Pietrzakowski M.. Kecik K. Vibration
control of autoparametric system using SMA spring and MR dampers in the
pendulum joints. Proceedings of the ASME International Design
Engineering Technical Conference &Computers and Information in
Engineering Conference IDETC/CIE 2014, p.1-7, DETC2014-34090, (MNISW=15).
- Kecik K.,
Borowiec M. An autoparametric energy harvester. Europen Physical
Journal Special Topics (EPJ), 222(7),
1597–1605, 2013, (MNISW=25, IF=1.76).
- Kecik K.
Energy harvesting of a pendulum vibration absorber. Przeglad Elektrotechniczny
(Electrical Review), (ER), 2013(7), 169-172, 2013, (MNISW=10).
- Kecik K.,
Mitura A., Warmiński J. Efficiency analysis of an autoparametric
pendulum vibration absorber. Eksploatacja
i Niezawodnosc-Maintenance and Reliability (EiN), 15(3),
221–224, 2013, ( MNISW=15, IF=0.505).
- Weremczuk A., Kecik
K., Rusinek R. Warmiński J. The dynamics of the cutting
process with duffing nonlinearity. Eksploatacja
i Niezawodnosc-Maintenance and Reliability (EiN), 15(3),
209–213, 2013, ( MNISW=15, IF=0.505).
- Litak G., Kecik
K., Rusinek R. Cutting force response in milling of
Inconel: Analysis by wavelet and Hilbert-Huang Transforms. Latin American Journal of Solids
and Structures (LAJSS), 10(1), 133-140, 2013, ( MNISW=25, IF=1.254).
- Kecik K.,
Rusinek R., Warminski J. Modeling of high-speed milling process with
frictional effect. Proceedings
of the Institution of Mechanical Engineers, Part K: Journal of
Multi-body Dynamics (JMD), 227(1), 3-11, 2013,
(MNISW=25, IF=0.414).
- Kecik K.,
Mitura A. Magnetorheological Damping of a System with a Pendulum
Vibration Absorber. Machine
Dynamics Research (MDR). 36(2), 50–57,
2012, (MNISW=6).
- Kecik K.,
Warminski J.
Chaos in mechanical pendulum-like system near main parameric resonanse.
Procedia IUTAM, 5, 249-258, 2012, ( MNISW=10).
- Kecik K.,
Rusinek R., Warminski J., Weremczuk A. Chatter control in the milling
process of composite materials. Journal
of Physics: Conference Series, 382(1) 012012, 2012, 1-6,
IOP Publishing, (MNISW=10).
- Warminski J., Kecik
K., Mitura A., Bochenski M. Nonlinear phenomena in
mechanical system dynamics. Journal
of Physics: Conference Series, 382(1) 012004, 1-6, 2012
(WoS), ( MNISW=10).
- Kecik K.
Influence of nonlinear damping on dynamics of mechanical system with a
pendulum. Vibrations in
Physical Systems (ViPS), XXV, 223-228, 2012, (MNISW=4).
- Kecik K.
Zastosowanie tłumika magnetoreologicznego do sterowania drganiami w
układzie mechanicznym z wahadłem. Przegled
Elektrotechniczny (Electrical Review), (ER), 2012(2),
223-226, 2012, (MNISW=15, IF=0.24).
- Rusinek R., Kecik
K., Warminski
J., A. Weremczuk. Dynamic model of cutting process with modulated
spindle speed. AIP Conf. Proc. no. 1493, 805-809, 2012. (
MNISW=10).
- Kecik K.,
Rusinek R., Warminski J. Dynamical analysis of milling process with
various radial depth of cut. Zeszyty
Naukowe Politechniki Poznańskiej. Budowa Maszyn i Zarzadzanie Produkcja,
2(16), 69-81, 2011, (MNISW=2).
- Rusinek R., Kecik
K., Warminski J. Dynamics of composite materials cutting. Advances in Manufacturing
Science and Technology (AMST), 35(3), 31-37, 2011, (
MNISW=7).
- Kecik K.,
Rusinek R., Warminski J. Stability lobes analysis of nickel superalloys
milling. International
Journal Bifurcation and Chaos (IJBCh), 21(10), 1-12, 2011,
(MNISW=25, IF=0.755).
- Kecik K.,
Warminski J. Dynamics of an autoparametric pendulum-like system with a
nonlinear semiactive suspension.
Mathematical Problems in Engineering (MPE), vol 2011,
Article ID 451047, Hindawi Publishing Corporation New York,
2011, ( MNISW=25, IF=0.777).
- Kecik K.,
Warminski J. Analysis of chaotic and regular motions of an
autoparametric system by recurrence plots applications. Vibrations in Physical Systems
(ViPS), XXIV, 221-226, 2010, (MNISW=4).
- Warminski J., Kecik
K.
Instabilities in the main parametric resonance area of mechanical
system with a pendulum. Journal of Sound Vibration, 332, 612-628, 2009,
(MNISW=24, IF=1.414).
- Kecik K.,
Warminski J. Experimental investigations of autoparametric vibrations
of a nonlinear system with pendulum. Przegled Mechaniczny (PM),
12, 86-89, 2006, ( MNISW=10).
- Lonkwic P.,
Kecik K., Lusiak T. The Proper elevator car vibration
during a travel. China
Elevator, 7, 28-32, 2006, (, MNISW=4).
- Warminski J., Kecik
K. Autoparametric vibrations of a nonlinear system with
pendulum. Mathematical
Problems in Engineering (MPE), vol. 2006, Article ID
80705, 1-19, Hindawi Publishing Corporation New York, 2006,
(MNISW=25, IF=0.777).
- Lonkwic P., Kecik
K., Lusiak T. Drgania kabiny dĽwigu podczas
jazdy. Dozór
Techniczny (DT), 5, 115 - 117, 2005, (MNISW=5).
- Ślusarska G., Stężycka E., Kecik K.
Odzyskiwanie energii elektrycznej z plecaka turystycznego. Automatyka
przemysłowa i inżynieria w naukach technicznych – wybrane zagadnienia,
Redakcja: Kozłowska J., Chodźko E. Wydawnictwo Naukowe TYGIEL,
156-164. ISBN 978-83-67104-59-3
- Kecik K. Modelling
of Electromechanical Coupling Effects in Electromagnetic Energy
Harvester, 1-8. Recent Trends in Wave Mechanics and Vibrations:
Proceedings of WMVC 2022 1st ed. 2023. Edited by Tiago Silva, Edited by
Z. Dimitrovova, R. Goncalves, P. Biswas, ISBN-10: 3031157575,
(MNiSW=20).
- Serwin K., Kecik K.
Analiza układu magnes -cewka z wykorzystaniem srodowiska
Comsol-Multiphysics. Badania naukowe w ujęciu dyscyplinarnym. M.
Drewniak, M. Ejdys, A. Ociepa-Kubicka. Wydawnictwo Naukowe Intellect,
2022. ISBN:978-83-67100-01-4. (MNISW=20,).
- Kecik K., Smagala A.Influence
of Linear and Nonlinear Electromechanical Couplings on Vibration
Absorber–Harvester System. In: Altenbach H., Amabili M., Mikhlin Y.V.
(eds) Nonlinear Mechanics of Complex Structures. Advanced Structured
Materials, vol 157. Springer, Cham.
https://doi.org/10.1007/978-3-030-75890-5_10.
- Ciecieląg K. Zaleski K., Kęcik K. Struktura geometryczna powierzchni po obróbce frezowaniem kompozytów polimerowych. Monografia. Politechnika Lubelska, Lublin 2020. ISBN: 978-83-7947-430-1.
- Kecik K., Rusinek R. Improving
functionality of absorber/harvester system by a smart adaptive
suspension, Theoretical Approaches in Non-Linear Dynamical Systems.
Editors: JAN AWREJCEWICZ, MAREK KAŹMIERCZAK, JERZY MROZOWSKI, 231-240,
2019. ISBN 978-83-66287-29-7 (MNiSW=20).
- Kecik K.,
Mitura A. Nonlinear dynamics of a vibration harvest-absorber system.
Experimental Study. Springer
Proceedings in Mathematics & Statistics, Dynamical Systems:
Modelling, Vol. 181, 1st ed. 197-208, 2016, XVI, (WoS,
Scopus, MNISW=15). ISBN 978-3-319-42402-6.
- Kecik K.,
Mitura A. Non-linear dynamics of a vibration harvest-absorber system. Dynamical Systems Control and
Stability. Editors: J. Awrejcewicz, M. KaĽmierczak, J.
Mrozowski, P. Olejnik, 297-306, 2015, (MNISW=5).
- Litak G., Rusinek R., Kecik
K., Rysak A., Syta A. Dynamics of composite milling:
Application of recurrence plots to Huang experimental modes. Discontinuity and Complexity in
Nonlinear Physical Systems Nonlinear Systems and Complexity,
6, 359-367, 2014, Machado, J. A. Tenreiro, Baleanu, Dumitru, Luo,
Albert C. J. (Eds.), Springer (chapter in book), (Scopus, MNISW=5),
ISBN 978-3-319-01411-1.
- Kecik K.
Bifurcations and control of an autoparametric vibration absorber. Dynamical Systems- Applications.
Editors: J.Awrejcewicz, M. Kazimierczak, P. Olejnik and J. Mrozowski,
59-68, 2013 (chapter in book), (MNISW=5).
- Rusinek R., Kecik
K., Warminski J. A problem of stability of milling of
materials used in avianton industry. IUTAM Symposium on Nonlinear
Dynamics for Advanced Technologies and Engineering Design.
IUTAM Bookseries. Editors: Marian Wiercigroch, Giuseppe Rega, ISBN:
978-94-007-5741-7. Volume 32, 235-247,2013 Springer (chapter in book), (Scopus, MNISW=5).
- Warminski J., Kecik
K. Autoparametric vibrations of an nonlinear system with a
pendulum and magnetorheological damping. Nonlinear Dynamics Phenomena in
Mechanics.
Eds. J. Warminski, S. Lenci, M. P. Cartmell, G. Rega and M.
Wiercigroch, 181, 1-62, 2012, ISBN 978-94-007-2473-0, Springer (chapter
of book), (WoS, Scopus, MNISW=5).
- Kecik K.,
Warminski J., Rusinek R. Regenerative and frictional chatter of high
speed milling process.
Modelling and experiment. Dynamical Systems.
Nonlinear Dynamics and Control, Editors by J. Awrejcewicz, M.
Kazimierczak, P. Olejnik, J. Mrozowski, 305-310, 2011 (chapter in
book), (MNISW=5).
- Rusinek R. Kecik
K., Warminski J. Analiza stabilnosci procesu
frezowania stopu tytanu. Obróbka
skrawaniem- Współczesne Problemy. Szkoła Obróbki
Skrawaniem, (chapter of book), Lodz, 253-260, 2010
(chapter in book), (MNISW=5).
- Kecik K.,
Rusinek R., Warminski J. Nonlinear dynamics of superalloys cutting.
10th Dynamical Systems
Theory and Applications. DSTA-2009. Editors by J.
Awrejcewicz, M. Kazimierczak, P. Olejnik, J. Mrozowski, volume 2,
607-612, 2009, (MNISW=5).
- Warminski J., Kecik
K. Regular and chaotic motions of an autoparametric real
pendulum system with the use of a MR damper. Modeling, Simulation and Control
of Nonlinear Engineering Dynamical Systems. Springer,
267-276, 2009,ISBN 978-1-4020-8778-3, Springer (chapter of book), (WoS,
MNISW=10).
- Kecik K.,
Warminski J. Control of regular and chaotic motions in
autoparametrically system with pendulum by using MR damper. Dynamical Systems Theory and
Applications, Lodz, December 17-20. Editors by J.
Awrejcewicz, P. Olejnik, J. Mrozowski, volume 2, 649-656, 2007,
(MNISW=5).
- Rusinek R., Kecik K., Mitura A. Effect of Nonlinear Electromechanical Coupling in Implanted Middle Ear. Book of Abstracts, European Nonlinear Oscillations Conference Committee (ENOCC), 476-477.
- Mitura A., Kecik K.
Experimental research of the influence of a coil shape on energy
recovery. Book of Abstracts, 29th Symposium on Experimental Mechanica,
s. 33, 2022.
- Mitura A., Kecik K.
Research of electromechanical coupling in a system with two levitating
magnets. Book of Abstracts, 29th Symposium on Experimental Mechanica,
s. 34, 2022.
- Kecik
K., Serwin K. Energy harvesting and vibration control using
adaptive suspension of a pendulm tuned mass damper.7th European
Conference on Structural Control Book of Abstracts and Selected Papers.
Editors: Jan Holnicki-Szulc, David Wagg and Łukasz Jankowski
. Co-editors: Bartłomiej Błachowski and Piotr Tauzowski, Institute of
Fundamental Technological Research, Polish Academy of Sciences,
Warszawa 2022.
- Slusarska G., Stęzycka E., Kęcik K. XIV
Interdyscyplinarna Konferencja Naukowa TYGIEL 2022
„Interdyscyplinarność kluczem do rozwoju” Abstrakty.Redakcja: P.
Pomajda, M. Maciąg, K. Maciąg, s. 184-85. ISBN 978-83-67194-30-3.
- Kecik K., Mitura A. Modelling of an Electromechanical Coupling in Magnetic Levitation Energy Harvester, 388-389, 2021. 16th
Conference on DYNAMICAL SYSTEMS Theory and Applications DSTA 2021,
Abstracts, Editors: J. Awrejcewicz, M. Kaźmierczak, J. Mrozowski, P.
Olejnik. ISBN 978–83–66741–20–1. DOI 10.34658/9788366741201.
- Kecik K., Mitura A. Nonlinear Dynamics of a 2DOF Magneto-Mechanical Harvester, 390-391, 2021. 16th
Conference on DYNAMICAL SYSTEMS Theory and Applications DSTA 2021,
Abstracts, Editors: J. Awrejcewicz, M. Kaźmierczak, J. Mrozowski, P.
Olejnik. ISBN 978–83–66741–20–1. DOI 10.34658/9788366741201.
- Mitura A., Kecik K. Energy recovery from system with two
pseudo-levitating magnets. Abstrakty,VIII Ogólnopolska Konferencja
Naukowa. Innowacje w Praktyce., 96,2021.
- Kecik K., Mitura
A. How friction influences energy recovery in a magnetic levitation
harvester. Book of abstracts. Indo-Polish Conference on Advenced
in Eergy
Harvesting Technology. Edited by: Pradeep V. Malaji, Session:
Energy Harvesting & Vibration Control in
Mechanical Systems, Abstract no. 8. 5, 2021.
- Mitura A., Kecik K. Nonlinear
dynamics of a magneto-mechanical system with two degrees of
freedom. Book of abstracts. Indo-Polish Conference on Advenced in
Eergy
Harvesting Technology. Edited
by: Pradeep V. Malaji, Session: Nonlinear Effects in Energy
Harvesting. Abstract no. 47. 23, 2021.
- Kecik K., Mitura A. Effect of Linear and Non-linear Electromechanical
Coupling in Magnetic Levitation Energy Harvester. NONDYCON2021 Scond
International Nonlinear Dynamics Conference. Bookof Abstracts. Edited
by W. Lacarbonara, A. Arena, V. Settimi, G. Quartana, 318, 2021.
- Kecik K. Mitura
A. Role of Electromechanical Coupling in the Vibration
Absorber/Harvester System. Book of Abstracts. International Conference
on Engineering Vibration. Euler Session, 3, 2020.
- Rusinek R., Weremczuk A., Kecik K. Nonlinear vibration in bio‐electro‐mechanical system of human middle ear. Book of
Abstracts. International Conference on Engineering Vibration. Newton
Session, 4, 2020.
- Kecik K.
Rusinek R. Improving functionality of absorber/harvester system by a
smart adaptive suspension. Abstracts of 15tth Confference on Dynamical
Systems Theory and
Applliicattiions, DSTA. Editors: J. Awrejcewicz, M. Kaźmierczak, J.
Mrozowski, P. Olejnik, 105, 2019.
- Rusienk R. Kecik K.,
Mitura A. Effect of electromechanical coupling in the middle ear with
implantable hearing device. Abstracts of 15tth Confference on Dynamical
Systems Theory and Applliicattiions, DSTA. Editors: J. Awrejcewicz, M.
Kaźmierczak, J. Mrozowski, P. Olejnik, 355, 2019.
- Kecik K. Theoretical
and experimental investigations of a magnetic levitation system for
energy recovery. Abstracts of 15tth Confference on Dynamical Systems
Theory and
Applliicattiions, DSTA. Editors: J. Awrejcewicz, M. Kaźmierczak, J.
Mrozowski, P. Olejnik, 104, 2019.
- Kecik K., Mitura A. Energy
recovery from a pendulum vibration absorber using two harvesting
sources. Book of Abstracts, Fourth International Conference on
Recent Advances in Nonlinear Mechanics, Editors: Marian Wiercigroch,
Przemyslaw Perlikowski, Jerzy Wojewoda, 5-7. 2019. ISBN
978-83-7283-956-5.
- Kecik K., Smagala A.
Nieliniowy model oraz symulacja drgań łozyska tocznego. Inowacje w
praktyce. Konferencja-warsztaty-wystawa-spotkania panelowe., 110-111,
2019.
- Kecik K., Smagala A. Effect of magnet-coil architecture on energy
recovery from maglev harvester. Inowacje w praktyce.
Konferencja-warsztaty-wystawa-spotkania panelowe., 223-224, 2019.
- Kecik K., Smagała A. Influence
of electromechanical coupling on foldover effect of maglev harvester.
Materiał konferencyjne XIII Konferencji Nowe Kierunki Rozwoju
Mechaniki, Poznań-Będlewo, 27-28, 2019.
- Kecik K., Rusinek
R.Dynamics and modelling of a middle ear with SMA prothesis,14th
Conference on Dynamical Systems Theory and Applications DSTA,
Abstract. 2017, p. 251
- Rusinek R., Kecik K.
Nonlinear aspects of the human middle ear. 14th Conference on Dynamical
Systems Theory and Applications DSTA, Abstract. 2017, p. 347.
- Kecik
K., Mitura A., Lenci S., Warminski J. Multiple solutions
and
corresponding energy output from a nonlinear maglev harvester.
Conference Proceedings of22nd International Conference on Computer
Methods in Mechanics, Editors: T. Burczynski, M. Kuczma, J. Warminski,
J. Podgorski, E. Blazik-Borowa, T. Lipecki, MS09-29 - MS09-30, 2017.
- Kecik K.,
Mitura A., Brzeski P.,
Perlikowski P., Energy recovery froma a pendulum vibration absorber
wita a maglev harvester. 9th European Nonlinear Dynamics Conference
(ENOC 2017) Papers, ISBN 978-963-12-9168-1. ID211, (http://congressline.hu/enoc2017/abstracts.php).
- Mitura A., Kecik
K., Augustyniak
M. Dynamics and energy harvesting control of an autoparametric
pendulum-like system. Book of abstracts: 10th International Conference
New Electrical and Electronic Technologies and Their Industrial
Implementation (NEET 2017), 49, 2017. ISSN 978-83-7947-259-8.
- Kecik
K., Energy recovery from a nonlinear maglev harvester.
Conference
Proceedidngs of 9th International Symposium on Mechanics of Materials
and Structures & 2nd International Conference on Advances in
Micromechanics of Materials (Abstract) 46-52, 76-77, 2017.
- Kecik K.,
Energy recovery from a nonlinear maglev harvester.
Conference Proceedidngs of 9th International Symposium on
Mechanics of
Materials and Structures & 2nd International Conference on
Advances
in Micromechanics of Materials, 76-77, 2017.
- Kecik K.
Materiały XII
Konferencji ''Nowe Kierunki Rozwoju Mechaniki - NKRM''.
Suprasl, 2017.
Simultaneous Energy Recovery and Vibration Control of a Pendulum
Absorber with a Maglev Harvester, 39-40.
- Mitura., Kecik
K. Odzyskiwanie
energii i dynamika wahadłowego eliminatora drgań z
półaktywnym
zawieszeniem. 56 Sympozjon ''Modelowanie w Mechnice",
25.02.2017-01.03.2017, Ustroń, 2017. Zeszyt streszczeń, 115, 2017.
- Kecik K.,
Mitura A.,
Warminski J. Lenci S. Book of papers 24th International Congress of
Theroretical and Applied Mechanics, ICTAM, 2016, Montreal , Kanada.
Nonlinear dynamics of a pendulum vibration absorber with a maglev
harvester,186-187, 2016, ISBN: NR16-127/2016E-EPUB.
- Rusinek R., Warminski J., Szymanski M., Weremczuk A., Kecik K. An
influence of temperature on dynamics of smart middle ear prosthesis.
ECCOMAS Proceedings, 2016.
- Kecik K.,
Mitura A.
Non-linear dynamics of a vibration harvest-absorber system.
Experimental Study. Proceedinds of 13th Conference on Dynamical Systems
Theory and Applications DSTA 2015, p 163, 2015. ISBN 978-83-7283-705-9.
- Kecik K.,
Mitura A.
Non-linear dynamics of a vibration harvest-absorber system.
Proceedinds of 13th Conference on Dynamical Systems Theory and
Applications DSTA 2015, p 162, 2015. ISBN 978-83-7283-705-9.
- Kecik K.,
Mitura A.
Influence of active elements on the pendulum’s rotational
motion
for energy harvesting. Proceedings of the 3rd Polish Congres of
Mechanics 21st International Conference and Computer Methods in
Mechanics, vol 2, 789-790, ISBN 978-83-932107-4-9, 2015.
- Kecik K.
Application of
shape memory alloy in harvesto-absorber system. Proceedings of VIII-th
International Symposium on Mechanics of Materials and Structures and
Fracture and Fragmentation in Science and Engineering Conference,
119-124, 2015.
- Kecik K.,
Ciecielag K.,
Zaleski K.: Damage detection of composite milling process using
recurrence plots technique. Conference Proceedings ofVIII-th
International Symposium on Mechanics of Materials and Structures and
Fracture and Fragmentation in Science and Engineering Conference,
111-117, 2015.
- Mitura A. Kecik
K.
Augustyniak M. Application of magnetorheological dampers to control of
a mechanical system with a pendulum. Proceedings of 8th European
Nonlinear Dynamics Conference (ENOC 2014), p. 306, 2014.
- Kecik K.,Mitura A.,
Warminski J. Wpływ parametrów układu na zjawisko dynamicznej
eliminacji drgań w nieliniowym układzie mechanicznym z wahadłem.
Zeszyty streszczeń, p. 79-80, 2014.
- Mitura A., Kecik
K.,
Warminski J. Badania eksperymentalne układu z wahadłem sterowanego za
pomocą tłumika MR oraz sprężyny SMA. Zeszyty streszczeń, p.
107,
2014.
- Rusinek R., Weremczuk A., Kecik K. How
friction influences regenerative chatter. Proceedings off ICOVP 2013,
11th International Conference on Vibration Problems, p.125.
- Rusinek R., Kecik
K.,
Warminski J. Bifurcations in frictional model of cutting process.
Proceedings of Nonlinear Dynamics in Enginneering: Modelling, Analysis
and Applications p. 78, 2013.
- Kecik K.
Rusinek R.,
Warminski J., Wiercigroch M. Dynamics of an active autoparametric
system. Proceedings of Nonlinear Dynamics in Enginneering: Modelling,
Analysis and Applications p. 35, 2013.
- Kecik K.,
Mitura M.,
Warminski J. Non-linear Dynamics and Magnetorheological Control of a
Pendulum System. Proceeddings of the Euromech Colloguium n.541. p.44.
ISBN-13 978-888-7965728, 2013.
- Rusinek R., Kecik
K.,
Weremczyk A., Warminski J. Dynamics of Ueda's oscillator with time
delay. Proceeddings of the Euromech Colloguium n.541. p.44. ISBN-13
978-888-7965728., 2013
- Rusinek R.,
Kecik K.,
Borowiec M., Weremczuk A. Warminski J. Dynamics of machining of
composite materials for aviation industry. Nonlinear Dynamics Phenomena
in Mechanical, Aerospace and Civil Engineering. Booklet of Abstract,
47-48, 2012.
- Kecik K.,
Warminski J.
Magnetorheological damping of an Autoparametric System with a Pendulum.
Nonlinear Dynamics Phenomena in Mechanical, Aerospace and Civil
Engineering. Booklet of Abstract, 20-21, 2012.
- Kecik K.,
Warminski J.,
Rusinek R. Chaos in mechanical systems. Selected Problems. Proceedings
of IUTAM Symposium of 50 Years of Chaos: Applied and Theoretical,
126-127, 2011.
- Rusinek R., Warminski J., Kecik K. Regenerative
and frictional chatter. Proceedings of 7 th European Nonlinear
Conference, Roma, 84, 2011.
- Rusinek R., Warminski J., Kecik K.
Regenerative chatter in composites milling.172-177, 2010. Proceedings
of the eight international conference on high speed machining. ISBN
978-2-9534170-2-9,
- Kecik K.,
Rusinek R.,
Warminski J. Verification of stability lobes of nickel superalloys
milling. Proceedings of the eight international conference on high
speed machining. ISBN 978-2-9534170-2-9, 319-324, 2010.
- Kecik K.,
Warminski J.,
Rusinek R. Vibration analysis during cutting of process aviation
materials. Proceedings of Manufacturing Conference, 98, 2010.
- Rusinek R.,
Kecik K., Warminski J. Dynamics of composite material
cutting. Proceedings of Manufacturing Conference, 176, 2010.
- Rusinek R., Warminski J., Kecik K.
Dynamics of cutting process of material used in aviation industry.
Proceedings of IUTAM Symposium on Nonlinear Dynamics for
Advanced
Technologies and Engineering Designed (NDATED), Aberdeen, Scotland,
111-112, 2010.
- Kecik K.,
Warminski J.
Magnetorheological damping of an autoparametrically excited system.
Conference Proceedings, Euromech Colloquium 498,Lublin, 186-192,
2008.
- Warminski J., Kecik
K.
Chaos control by application of magnetorheological damping. Proceedings
of XXII International Congres of Theoretical and Applied Mechanics
(ICTAM), 25-29 August, Adelaide, Australia, 2008.
- Kecik K.,
Warminski J.,
Szabelski K. Instability area in the main parametric resonance of
mechanical system with pendulum. Proceedings of The Second
International Conference. Nonlinear Dynamics, 25-28 September, Ukraine,
Kharkov, 114-119, 2007.
- Kecik K,.
Warminski J.,
Szabelski K. Drgania regularne i chaotyczne układu
mechanicznego
z wahadłem. Materiały konferencyjne CD Rom, I Kongresu Mechaniki
Polskiej, I Kongres Mechaniki Polskiej, Warszawa, 28-31 sierpnia 2007.
- Warminski J.,
Kecik K.,
Mitura A. Influence of nonlinear suspension on vibrations of
autoparametric system with pendulum. Proceedings of 16 th International
Workshop on Computational Mechanics of Materials, 53-54, 2006.
- Kecik K.,
Warminski J.
Autoparametric vibration of a nonlinear system with pendulum.
Proceedings of The International Conference "Nonlinear Dynamics",
Kharkov, Ukraine, 87-91, 2004.
iam vel arcu
velit, eget consequat risus.